Feintool increases net income by 88 percent.

Organic sales growth
In 2014, growth in the global automotive industry continued worldwide. Feintool benefited from the positive conditions in the sector and, moreover, grew faster than the market in all relevant regions by gaining market share.

In this environment, the Feintool Group generated sales of CHF 503.4 million in the 2014 financial year, which corresponds to an increase of 15.6%. On a currency-adjusted basis, the company recorded 17.2% sales growth.

The largest share of sales was generated by the System Parts segment, in which Feintool is involved in global operations for high volume production of precision fineblanking and forming components. During the year under review, the segment grew by 17.1% to CHF 420.0 million, accounting for 83.4% of consolidated sales. The growth is mainly attributable to the increase in the volume of sales of new products in Europe and the United States.

At CHF 98.3 million, the Fineblanking Technology segment, in which Feintool offers end-to-end technological solutions for fineblanking, saw virtually no change in sales from the previous year’s level and accounted for 16.6% of consolidated sales. After factoring out internal sales, turnover with external customers increased by 8.2%.

Operating profit shows high growth
In the year under review, both segments and all regions again made a positive contribution to operating profit. The Feintool Group increased its operating profit by 72.6% to CHF 35.1 million. As a result, the operational business posted an EBIT margin of 7.0% for the first time.

The System Parts segment reported EBIT of CHF 35.0 million and an EBIT margin of 8.3%. In the high volume parts business, the result was driven by a combination of good capacity utilization and numerous measures to increase efficiency. In addition, nominations won in previous years made their first contribution to results.

In the capital goods business of the Fineblanking Technology segment, Feintool posted an operating profit of CHF 6.6 million. This figure is slightly higher than the previous year, even though expenditure on research and development continued at a high level.

Net income up by nearly 90 percent
Overall, Feintool generated net income of CHF 35.4 million, corresponding to an increase of 88.0%. This also includes a gain of CHF 10.8 million on the disposal of IMA Automation Amberg GmbH. In the continuing core business, Feintool posted net income of CHF 24.6 million. This represents an increase of 66.0%.

Numerous orders and anticipated releases
For the ongoing financial year, we expect to remain basically positive. At the beginning of year, anticipated contract releases by our customers in the System Parts segment amount to CHF 213.9 million. This in turn means a year-on-year increase of 18.2% spread equally across all our regional markets.

Incoming orders in the Fineblanking Technology segment increased by 10.1% to CHF 102.0 million. The orders backlog grew by 9.9% to CHF 42.2 million, equivalent to around eight months’ worth of work for the long-term press and tool business.

Higher dividend payment planned
Given the Feintool Group’s positive performance as well as its stable financial position, the Board of Directors has decided to propose to the Annual General Meeting on 14 April 2015 that it approve a 25% higher dividend of CHF 1.50 per Feintool share.
Feintool adopts forward-looking response to Swiss franc appreciation
In recent years, Feintool has systematically expanded its strategy of manufacturing in the various markets and currency areas in which it operates. 85% of sales are generated outside Switzerland.

Nevertheless, the Swiss National Bank’s decision to abandon its exchange rate floor on 15 January 2015 has a direct impact on Feintool’s Swiss operations, particularly in terms of their cost structure. The company has responded with a range of measures at its Swiss production facilities in Lyss and Jona, including an increase in weekly working hours, cuts in numbers of temporary staff and a halt to new recruitment and overtime.

As a strategic response to the strong Swiss franc, in Switzerland Feintool will further strengthen its focus on specialities and is investing more than CHF 10 million in development, new technologies, expansion of the value chain and more efficient production equipment.

Expansion of production capacity in Europe
Based on projected contract releases, the current financial year will see Feintool’s European fineblanking production facilities reach their capacity limits. With a view to accommodating further growth and meeting capacity requirements, on 27 February 2015 an agreement was concluded for the takeover of German company Gabler Feinschneidtechnik GmbH. Established in 2007 in Oelsnitz (Saxony), the ISO/TS 16949-certified fineblanking company employs 38 staff and is equipped with modern infrastructure which helps Feintool to expand rapidly and substantially.

Feintool expects positive business performance in 2015
Feintool is expecting business performance to be basically positive in 2015. At the exchange rates prevailing at the beginning of the 2015 financial year, sales were expected to grow by 6%, with a further improvement in margins. The sharp appreciation of the Swiss franc against the euro since 15 January 2015 will, however, affect these figures. Based on the CHF/EUR exchange rate since the euro floor was removed, sales are put at CHF 460–480 million and operating earnings at some CHF 27 million. We continue to target sales of CHF 600 million and an operating margin of 8 percent in the medium term.

Download media release as pdf

Increased sales in Q3

In the third quarter of 2017, Feintool Group sales were up 10.8% compared to the same period last year (in local currency +9.5%).

The System Parts segment, which is active in high-volume parts production, increased its quarterly sales by 11.4% (in local currency +9.9%) to CHF 135.3 million. Despite some manufacturers reducing production owing to company holidays, the global automotive market remained robust during the summer months. Feintool benefited once again from this overall favorable environment, whereby the growth was mainly driven by the European locations.

Sales in the investment goods segment, the Fineblanking Technology segment, rose significantly in the third quarter, reaching CHF 26.2 million, an increase of 17.2% (in local currency +17.4%) over the previous year.

Encouraging order intake in the capital goods segment

The order intake of the Fineblanking Technology segment recovered significantly after a weaker first half-year, and is 18.3% higher than the prior-year period after the first nine months. The order backlog also recorded an increase of 16.6%.

Expected releases in the high-volume parts business remain encouraging

Feintool’s customers in the System Parts segment are planning releases amounting to CHF 260.2 million in the coming six months. This figure is 16.6% higher than in the previous year.

Optimistic Outlook

For 2017 as a whole, Feintool expects to continue its positive business development despite a market environment characterized by political uncertainties. A total of CHF 580 million to CHF 600 million in sales and an EBIT margin of around 7.6% are expected.


The financial key figures at a glance

in CHF m
in CHF m

in %

in local currency
in %
Sales Feintool Group 450.2 416.9 8.0 8.1
System Parts segment 401.2 363.4 10.4 10.5
Fineblanking Technology segment 63.3 66.8 -5.2 -5.0
Orders received (Investment goods) 70.0 59.2 18.3 18.4
Order backlog (Investment goods) 42.3 36.3 16.6 16.7
Expected Releases high-volume parts production 260.2 223.1 16.6 14.1
in CHF m
in CHF m

in %

in local currency
in %
Sales Feintool Group
153.4 138.4 10.8 9.5
System Parts segment 135.3 121.4 11.4 9.9
Fineblanking Technology segment 26.2 22.4 17.2 17.4
Orders received (Investment goods) 20.7 16.2 27.5 27.6


1) Compared to the same period in the previous year


Feintool is an internationally active market leader in the technologies of fineblanking, forming and sheet metal punching for the processing of steel sheets.

Werkzeuge Werkzeugbau

Get in touch with us. We will be glad to help you.

Request a callback now.

Ihre Anfrage wurde gesendet!
Ihre Anfrage konnte nicht gesendet werden!
We use cookies only to analyse the visits to our website. The anonymised information obtained in the course of your visit to our website is used on an event-driven basis to analyse user behaviour.
Allow all cookies
Allow selection
Individual settings
Individual settings
This is an overview of all cookies used on the website. You have the option of making individual cookie settings. Give your consent to individual cookies or entire groups. Essential cookies cannot be deactivated.
Essential (2)
Essential cookies are required for the basic functionality of the website.
Show cookies
Statistics (1)
Statistics cookies track the user and the associated surfing behavior to improve the user experience.
Show cookies